As you will see in the photos below, my original glove box had been butchered. Someone cut holes in the back of the glove box and the inside flocking was in poor condition. New glove boxes are costly, so I set out for a solution.
A surprise to me was to see a glove box for sale on Ebay described as for a Porsche 911. Price was only $10. Shape looked the same to me, so "click" on the Buy-It-Now and it arrived at my doorstep. To my delight, It has the same outside dimensions/shape as the 356 glove box. Take a look at the side by side photos. The horrible one is the original 356 part.
There are differences. The cut out for the magnetic latch is not here, nor is the cut out for the lock. Also, the 911 box had no flocking. So, out came my utility knife and I cut the box for the correct latch and lock. I followed this with a good cleaning of the inside and applied black paint to the outside. Lastly I applied glue and flocking.
I am happy with the result. My $10 glove box!!
Be sure to click on "Previous" at the page bottom to see lots of previous Blog pages!
the blog Archives