... and it's cold in the garage too! Daytime high of 46 degrees, low of 32 degrees. I wanted to get the interior done before the cold weather hit, but other home projects took priority. Before the cold hit I completed all the carpet on the passenger side plus the upholstery below both quarter windows. On drivers side I have not yet done the long piece of carpet that runs on the longitudinal. That piece needs plenty of heat and manipulation and a good amount of glue. It's just too cold to do it now.
So, I redirect.
Next will be the padded dash (only glued at the ends) and the installation of all the instrumentation- 3 gauges, clock, vent lever on dash, radio and speakers. Plenty to do!
To help with gauge installation, I took pictures of the back side of the gauges when removing everything, but I will also be referencing a nice electrical diagram I thought I would share. The drawing below is just for the combination gauge, tach and clock. If you're in need of the whole electrical system diagram, I have that as well, just look in the Misc Section of the website.
I will post some photos of the dash when complete.
Be sure to click on "Previous" at the page bottom to see lots of previous Blog pages!
the blog Archives