EnginesInBack
  • Home
  • Exterior
  • Interior
  • Engine & Trans
  • Tool/Travel Kits
  • Documents
  • Accessories
  • Underside, Steering & Brakes
  • Events
  • Misc.
    • Misc. Stuff
    • Electrical Diagram
    • In The End
    • Typ 64
    • Willhoit-Leno 356
    • Million Mile 356
    • N. C. Museum of Art
  • Vintage Photos
  • Original vs Repro
    • Original vs Repro
    • Original Porsche Crests
    • Original Interior Door Handles
    • Original Ashtray
    • Original Durant Mirror
    • Original 356 C Spare Tire Straps
    • Original 356 C Bumper Guards
    • Original Reverse Light
    • Generator/Fan Belts
  • Our Air-Cooled Journey
  • Contact Us
  • TRANS OCEAN MOTORS
  • Restoration Work- Blog
  • Classifieds
  • Made By Hand

I'm A Carpetbagger!

5/24/2021

0 Comments

 
Well, not a Carpetbagger in the strictest sense.  The term Carpetbagger was first used after the Civil War to describe people from the North who headed to the South in a opportunistic way for self gain.

I've actually become a bagger of carpet!  I am using Weldwood contact glue to install the carpet, and with all the bends and contours of the interior, it is difficult to maintain pressure on the carpet against the padding.  The weather here is not helping much either, we had rain with a high temperature of 50 degrees yesterday, so it's still cool and it takes much longer for the glue to set.  

We have a Traeger bar-b-que and it burns wood pellets for fuel.  Really like it, and we buy bags of pellets on-line in different flavors.  We also have a wood pellet burning heating stove (looks like a wood stove) that we use to supplement heat in the home.  Both of these come in 40 lb bags, and the bags are very pliable.  

Using the 40lb bags, I can heap on the glue, get everything in position, and let the bag sit on the area for days.  I am sure professionals have a better system, but that's what is going on in my garage.
​

Picture
0 Comments

Chrome Celebration!

5/12/2021

0 Comments

 
Yahoo!!!!  Bling, bling, bling!

My date matching chrome wheels are back from Perfect Custom Wheels in California.  I had all 5 of them stripped and re-chromed back to their original luster.  Opening the boxes was like Christmas morning!

I used a set of 5.5" rollers while the car was getting painted, and now these original 4.5" wheels will be mounted to Miss April.
​
Weather is finally getting warmer, so I'm also moving forward again on the interior, but for today, it is a celebration of chrome!  Kinda proud of the NOS hubcap emblem too-
Picture
Picture
Picture
Picture
Picture
0 Comments

Arresting Post

5/1/2021

2 Comments

 
In the post below (Rattle Can Hatfield) I mentioned a filter inside of the tube coming from the oil filler can.  I made several attempts to clean out this filter, and did get some flow through it eventually, but I wasn't satisfied that it would perform as originally designed.
The 356 C is the only 356 that has this element (sometimes called a "flame arrestor").  Previous models did not vent to the carburetor, but instead they had a line directly from the oil filler can down to atmosphere below the engine tin.  The venting to the passenger carburetor was likely do to legislation requiring a more closed system.   By the year after my car was produced, this flame arrestor was moved, and was inside the outlet tube of the oil filler in the 912.  
In the photo below you'll see an example of the 912 flame arrestor.  It is larger than the 356 C one, and does not fit in the oil filler of the 356 C, nor in the air filter.  It is obvious now that the reason the 912 hose from oil filler can to the carb has different diameters- the oil filler tube is larger because this flame arrestor was installed.
Back to my air filter housing.  I decided to remove the part for better cleaning.  Below is a photo of the primary screen, secondary screen (finer) and a wad of brass wool.  I left the innermost  screens in place and was able to clean them up in situ.  The full assembly consists of primary screen, secondary screen, brass wool, secondary screen and primary screen again.
After cleaning the screens, I installed new brass wool.  Photos show the cleaned original wool and my replacement brass wool.
This was not an effort to get better filtration.  It was an effort to make sure my engine vents.  The 356 C has unvented valve covers, so this is the ONLY path for engine venting.  I guess Miss April just wanted to vent!
Picture
Picture
2 Comments

    restoration & blog Archives

    October 2022
    September 2022
    July 2022
    June 2022
    May 2022
    April 2022
    March 2022
    February 2022
    January 2022
    December 2021
    November 2021
    October 2021
    September 2021
    August 2021
    July 2021
    June 2021
    May 2021
    April 2021
    March 2021
    February 2021
    January 2021
    December 2020
    November 2020
    October 2020
    September 2020
    August 2020
    July 2020
    June 2020
    May 2020
    April 2020
    March 2020
    February 2020
    January 2020
    December 2019
    November 2019
    October 2019
    August 2019
    July 2019
    June 2019
    May 2019
    April 2019
    March 2019
    February 2019
    January 2019
    December 2018
    November 2018
    October 2018
    September 2018
    August 2018
    July 2018
    June 2018
    May 2018
    March 2018
    February 2018
    January 2018
    December 2017
    November 2017

  • Home
  • Exterior
  • Interior
  • Engine & Trans
  • Tool/Travel Kits
  • Documents
  • Accessories
  • Underside, Steering & Brakes
  • Events
  • Misc.
    • Misc. Stuff
    • Electrical Diagram
    • In The End
    • Typ 64
    • Willhoit-Leno 356
    • Million Mile 356
    • N. C. Museum of Art
  • Vintage Photos
  • Original vs Repro
    • Original vs Repro
    • Original Porsche Crests
    • Original Interior Door Handles
    • Original Ashtray
    • Original Durant Mirror
    • Original 356 C Spare Tire Straps
    • Original 356 C Bumper Guards
    • Original Reverse Light
    • Generator/Fan Belts
  • Our Air-Cooled Journey
  • Contact Us
  • TRANS OCEAN MOTORS
  • Restoration Work- Blog
  • Classifieds
  • Made By Hand