The new bezels arrived from Stoddard and they went right on without any problem. So that the bezel would not come in contact with a sharp edge, I did not put them on with a screwdriver. I used a spoon! Pressing with my thumb in the "bowl" of the spoon, I carefully kept pressing inward and down. Went around and around until all was smooth, and I am really happy with the result.
Group photo below. Hard to get them all in focus and without reflections on the glass, so this is my best effort. Soon my LED lights will arrive for the gauges and I will do a test at night, so I might post a photo of that later. Be sure to click on "Previous" at the page bottom to see lots of previous Blog pages!
0 Comments
Leave a Reply. |
restoration & blog Archives
October 2022
|