I've been working a little bit on cleaning up my tool kit items, and on one piece in particular I thought I would share some notes.
The spark plug wrench is a Klein 21 and has a "tommy bar" to put through the holes in the small end so that the wrench can be turned to install/remove spark plugs on the road. Inside of the large end, there is a rubber piece that holds the spark plug to keep it from falling out of the wrench during installation and removal. I decided while cleaning the wrench that I would remove the rubber piece for better cleaning. Glad I did because the wrench was full of dirt and all kinds of crud underneath the rubber piece (deeper into the socket). Below is a shot of the cleaned up tool and I included a shot showing the rubber piece that I temporarily removed for cleaning. If you want to see more photos of the complete tool kit, check out my Tool Kit section of the website. Be sure to click on "Previous" at the page bottom to see lots of previous Blog pages!
0 Comments
Leave a Reply. |
restoration & blog Archives
October 2022
|